The paper reports the main results of an investigation on biogas reforming process developed for an integration with high temperature fuel cells systems. Experimental activities have been developed to determine performances of a nickel catalyst in different biogas reforming conditions have been investigated. Attention has been addressed toward the effect of gasifier agents (CO 2, H 2O and O 2) on outlet stream composition and carbon deposition on catalytic surface. Previously, the carbon formation rate in dry and steam reforming reactions apply to a biogas stream (CH 4/CO 2-60/40 vol%) has been evaluated using Aspen plus chemical processor simulator in order to define the operative conditions limit and to selected the best one. A mathematical model, based on experimental data, has been developed to compare the polarization curves of a MCFC mono-cell fed with three different syngas compositions obtained by biogas reforming section in order to find out the best operational conditions for the two integrated systems (MCFC/fuel processor). A parallel trend of the the polarization curves have been obtained due to the assumptions considered for the model developing, as: (i) inlet gas composition effects on ohmic and activation loses are negligible; (ii) diffusional losses are dependent by gas compositions; (iii) diffusional losses are negligible in the graphic sections characterized by low current density.

Analysis of biogas reforming process for Molten Carbonate Fuel cells

CHIODO, VITALIANO;GALVAGNO, ANTONIO;
2012-01-01

Abstract

The paper reports the main results of an investigation on biogas reforming process developed for an integration with high temperature fuel cells systems. Experimental activities have been developed to determine performances of a nickel catalyst in different biogas reforming conditions have been investigated. Attention has been addressed toward the effect of gasifier agents (CO 2, H 2O and O 2) on outlet stream composition and carbon deposition on catalytic surface. Previously, the carbon formation rate in dry and steam reforming reactions apply to a biogas stream (CH 4/CO 2-60/40 vol%) has been evaluated using Aspen plus chemical processor simulator in order to define the operative conditions limit and to selected the best one. A mathematical model, based on experimental data, has been developed to compare the polarization curves of a MCFC mono-cell fed with three different syngas compositions obtained by biogas reforming section in order to find out the best operational conditions for the two integrated systems (MCFC/fuel processor). A parallel trend of the the polarization curves have been obtained due to the assumptions considered for the model developing, as: (i) inlet gas composition effects on ohmic and activation loses are negligible; (ii) diffusional losses are dependent by gas compositions; (iii) diffusional losses are negligible in the graphic sections characterized by low current density.
2012
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11570/2512831
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 21
  • ???jsp.display-item.citation.isi??? 19
social impact