A UV pulsed lasers was employed to produce C and Ti ions of different charge with current densities of the order of 10 mA/cm2. A post ion acceleration, up to 30 kV, was employed to increase the ion energy and to implant polyethylene biocompatible surfaces up to a depth of about 200 nm. Preliminary results about surface properties indicate that implanted surfaces have higher wetting and micro-hardness with respect to un-implanted ones.

Modification studies of polyethylene by multi-ion implantation by laser ion source

TORRISI, Lorenzo;VISCO, Annamaria;CAMPO, NINO
2007

Abstract

A UV pulsed lasers was employed to produce C and Ti ions of different charge with current densities of the order of 10 mA/cm2. A post ion acceleration, up to 30 kV, was employed to increase the ion energy and to implant polyethylene biocompatible surfaces up to a depth of about 200 nm. Preliminary results about surface properties indicate that implanted surfaces have higher wetting and micro-hardness with respect to un-implanted ones.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11570/1674835
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact