Composite membranes based on sulphonated Polyetheretherketone (sPEEK) and 5,10,15,20- tetra(4-pyridyl)porphyrin (TPyP) were developed for portable applications. A sulphonation degree of 65% and different loadings (0e5 wt%) of TPyP porphyrin were used. Spectroscopic studies (UVeVis and fluorescence emission), ionic exchange capacity, water uptake, structural and morphological analyses were carried out. A good interaction between the filler and the polymer was found, probably due to specific supramolecular interactions among the nitrogenous atoms present in the periphery of the porphyrin ring and sulphonic groups of polymer. The membrane with the lowest loading (~1 wt%) of TPyP, shows slightly lower water uptake and unaltered l values than the reference membrane, resulting in quite unaltered proton conductivity also in anhydrous conditions. Electrochemical tests were performed in a PEFC 25 cm2 single cell at room temperature and anhydrous hydrogen/ humidified air. A power density of 93 mW/cm2 was found in anhydrous conditions for sample with the lowest loading of TPyP.
Composite sPEEK-TPyP membranes development for portable applications
ROMEO, Andrea;MONSU' SCOLARO, LuigiPenultimo
;Castriciano, M. A.
2015-01-01
Abstract
Composite membranes based on sulphonated Polyetheretherketone (sPEEK) and 5,10,15,20- tetra(4-pyridyl)porphyrin (TPyP) were developed for portable applications. A sulphonation degree of 65% and different loadings (0e5 wt%) of TPyP porphyrin were used. Spectroscopic studies (UVeVis and fluorescence emission), ionic exchange capacity, water uptake, structural and morphological analyses were carried out. A good interaction between the filler and the polymer was found, probably due to specific supramolecular interactions among the nitrogenous atoms present in the periphery of the porphyrin ring and sulphonic groups of polymer. The membrane with the lowest loading (~1 wt%) of TPyP, shows slightly lower water uptake and unaltered l values than the reference membrane, resulting in quite unaltered proton conductivity also in anhydrous conditions. Electrochemical tests were performed in a PEFC 25 cm2 single cell at room temperature and anhydrous hydrogen/ humidified air. A power density of 93 mW/cm2 was found in anhydrous conditions for sample with the lowest loading of TPyP.File | Dimensione | Formato | |
---|---|---|---|
[2015] - Composite sPEEK-TPyP membranes development for portable applications [IJHE].pdf
solo utenti autorizzati
Tipologia:
Versione Editoriale (PDF)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
994.54 kB
Formato
Adobe PDF
|
994.54 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.