The paper proposes an AC/AC converter for wind power generators, which is based on a standard back-to-back IGBT structure and an auxiliary circuit made up of two SiC MOSFETs. The latter is responsible for momentarily forcing the DC bus voltage to zero whenever an IGBT commutates. This enables zero voltage switching for all twelve of the IGBTs in the converter, eliminating the need for resonant cells, clamping circuits, or special control strategies and allowing standard PWM techniques to be employed. The resulting converter efficiency is comparable to or superior to that of a fully SiC MOSFET-equipped back-to-back converter, but at a much lower cost. This is because only two additional SiC MOSFETs are required alongside the twelve conventional IGBTs rather than twelve SiC MOSFETs. Compared with conventional hard-switched IGBT back-to-back converters, the proposed topology achieves an efficiency improvement of around 2.2 %, with an additional cost for the power circuit components of around 15 %.

Zero Voltage Switching Back to Back Converter for Wind Generators

Foti, Salvatore;Baia, Gioele;Campagna, Danilo;
2026-01-01

Abstract

The paper proposes an AC/AC converter for wind power generators, which is based on a standard back-to-back IGBT structure and an auxiliary circuit made up of two SiC MOSFETs. The latter is responsible for momentarily forcing the DC bus voltage to zero whenever an IGBT commutates. This enables zero voltage switching for all twelve of the IGBTs in the converter, eliminating the need for resonant cells, clamping circuits, or special control strategies and allowing standard PWM techniques to be employed. The resulting converter efficiency is comparable to or superior to that of a fully SiC MOSFET-equipped back-to-back converter, but at a much lower cost. This is because only two additional SiC MOSFETs are required alongside the twelve conventional IGBTs rather than twelve SiC MOSFETs. Compared with conventional hard-switched IGBT back-to-back converters, the proposed topology achieves an efficiency improvement of around 2.2 %, with an additional cost for the power circuit components of around 15 %.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11570/3366921
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact