Ultra-high-molecular-weight-polyethylene (UHMWPE) surfaces are characterized in terms of roughness and wetting. Changes in the surface morphology of the polymer were induced macroscopically by mechanical friction and microscopically by ion implantation. The ion irradiation was obtained by using 300 keV Xe+ beams with doses ranging between 10(14) and 10(15) ions/cm(2) . Roughness and wetting measurements were performed in order to investigate the UHMWPE surface properties before and after the surface treatments. The wetting angle of the polymeric surface increases with the decrease of the roughness and with the increase of the absorbed dose. Results are discussed from the point of view of the biological reactions that could degrade the UHMWPE biocompatible surfaces employed in different mobile prostheses.
Wetting modifications of uhmwpe surfaces induced by ion implantation
TORRISI, Lorenzo;VISCO, Annamaria;CAMPO, NINO
2003-01-01
Abstract
Ultra-high-molecular-weight-polyethylene (UHMWPE) surfaces are characterized in terms of roughness and wetting. Changes in the surface morphology of the polymer were induced macroscopically by mechanical friction and microscopically by ion implantation. The ion irradiation was obtained by using 300 keV Xe+ beams with doses ranging between 10(14) and 10(15) ions/cm(2) . Roughness and wetting measurements were performed in order to investigate the UHMWPE surface properties before and after the surface treatments. The wetting angle of the polymeric surface increases with the decrease of the roughness and with the increase of the absorbed dose. Results are discussed from the point of view of the biological reactions that could degrade the UHMWPE biocompatible surfaces employed in different mobile prostheses.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
