Investigation of permeation tubes for temperature-compensated gas-sensor calibrators

Ethanol permeation tubes have been proposed for a possible use in temperature-compensated gas-sensor calibrators. Two commercial tubes with a different geometric configuration of the polymeric membrane (wafer- and EL-type) have been tested. First, their permeation characteristics have been evaluated and, subsequently, their performances tested in an apparatus simulating programmed temperature cycles. Both tubes have shown a linear permeation rate in the range of temperature investigated and a low permeation temperature coefficient, with the EL-type tube showing also a very fast response to temperature variation. The integration of this latter tube with a flow-compensation controller has lead to the realization of a temperature-compensated calibrator device, allowing to maintain the ethanol concentration constant at the calibrator outlet by simply modulating the carrier flow through the permeation tube to compensate the temperature fluctuation. Results obtained in the generation of calibrated gas-phase ethanol concentrations, in the range from 1 to 500 ppm, suggest a promising use of these temperature-compensated permeation tubes as calibrators in portable gas-sensor devices.