The methanol steam reforming (MSR) reaction was studied by using both a dense Pd-Ag membrane reactor (MR) and a fixed bed reactor (FBR). Both the FBR and the MR were packed with a new catalyst based on CuOAl2O3ZnOMgO, having an upper temperature limit of around 350 8C. A constant sweep gas flow rate in counter-current mode was used in MR and the experiments were carried out by varying the water/methanol feed molar ratio in the range 3/1–9/1 and the reaction temperature in the range 250– 300 8C. The catalyst shows high activity and selectivity towards the CO2 and the H2 formation in the temperature range investigated. Under the same operative conditions, the MR shows higher conversions than FBR and, in particular, at 300 8C and H2O/CH3OH molar ratio higher than 5/1 the MR shows complete methanol conversion.
Hydrogen production by methanol steam reforming carried out in membranereactor on Cu/Zn/Mg-based catalyst
PARMALIANA, Adolfo;ESPRO, Claudia;
2008-01-01
Abstract
The methanol steam reforming (MSR) reaction was studied by using both a dense Pd-Ag membrane reactor (MR) and a fixed bed reactor (FBR). Both the FBR and the MR were packed with a new catalyst based on CuOAl2O3ZnOMgO, having an upper temperature limit of around 350 8C. A constant sweep gas flow rate in counter-current mode was used in MR and the experiments were carried out by varying the water/methanol feed molar ratio in the range 3/1–9/1 and the reaction temperature in the range 250– 300 8C. The catalyst shows high activity and selectivity towards the CO2 and the H2 formation in the temperature range investigated. Under the same operative conditions, the MR shows higher conversions than FBR and, in particular, at 300 8C and H2O/CH3OH molar ratio higher than 5/1 the MR shows complete methanol conversion.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
