Cu2O/gas diffusion layer (GDL) electrodes prepared by electrodeposition were studied for the electrocatalytic reduction of CO2. The designed electrode was also tested in solar‐light‐induced CO2 conversion in combination with a CuO/NtTiO2 photoanode using a compact photoelectrocatalytic (PEC) cell. Both PEC cell electrodes were prepared using non‐critical raw materials and low cost, easily scalable procedures. In the PEC experiments, a total carbon faradaic selectivity of about 90 % to formate and about 75 % to acetate was obtained after 24 h of operations without application of potential/current or using sacrificial agents. In electrocatalytic tests of CO2 reduction at −1.5 V, the same electrode yielded high total faradaic selectivity (>95 %) but formed selectively formate (about 80 % selectivity) rather than acetate. The in situ transformation of the Cu2O/GDL electrode leads to the formation of a hybrid Cu2O–Cu/GDL system. Cyclic voltammetry data indicate that the potential and the presence of CO2 (not only of HCO3− species) are both important elements in this transformation. Data also indicate that the surface concentration of CO2 (or of its products of transformation) on the electrode is an important factor to determine performance in the conversion of CO2.

CO2 Reduction of Hybrid Cu2O–Cu/Gas Diffusion Layer Electrodes and their Integration in a Cu-based Photoelectrocatalytic Cell

Chiara Genovese
Secondo
;
Francesco Tavella;Claudio Ampelli;Gabriele Centi
Penultimo
;
Siglinda Perathoner
Ultimo
2019-01-01

Abstract

Cu2O/gas diffusion layer (GDL) electrodes prepared by electrodeposition were studied for the electrocatalytic reduction of CO2. The designed electrode was also tested in solar‐light‐induced CO2 conversion in combination with a CuO/NtTiO2 photoanode using a compact photoelectrocatalytic (PEC) cell. Both PEC cell electrodes were prepared using non‐critical raw materials and low cost, easily scalable procedures. In the PEC experiments, a total carbon faradaic selectivity of about 90 % to formate and about 75 % to acetate was obtained after 24 h of operations without application of potential/current or using sacrificial agents. In electrocatalytic tests of CO2 reduction at −1.5 V, the same electrode yielded high total faradaic selectivity (>95 %) but formed selectively formate (about 80 % selectivity) rather than acetate. The in situ transformation of the Cu2O/GDL electrode leads to the formation of a hybrid Cu2O–Cu/GDL system. Cyclic voltammetry data indicate that the potential and the presence of CO2 (not only of HCO3− species) are both important elements in this transformation. Data also indicate that the surface concentration of CO2 (or of its products of transformation) on the electrode is an important factor to determine performance in the conversion of CO2.
2019
File in questo prodotto:
File Dimensione Formato  
Brito_et_al-2019-ChemSusChem.pdf

solo utenti autorizzati

Descrizione: manuscript
Tipologia: Versione Editoriale (PDF)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 1.35 MB
Formato Adobe PDF
1.35 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11570/3144995
Citazioni
  • ???jsp.display-item.citation.pmc??? 2
  • Scopus 42
  • ???jsp.display-item.citation.isi??? 35
social impact